Nissan Titan HID Xenon Light install - Swankmonkey Racing
2000 GTI 1.8T
2002 Subaru WRX
2003 GTI 1.8T
2004 Mazda RX8
Sorry about the broken images, they are back online now!
After doing some research, we decided on the 6500k retrofit conversion kit, which is touted as a 100% plug and play kit. The low beam on the Nissan Titan is a 9006 bulb. Also through the research we found this FAQ to be really the summation of EVERYTHING!.
So let's get to the installation! Start by working on the driver's side. Turn the front wheels all the way to the right. You will see under the fender towards the front, a funky clip. Simply pull the tab out and you can then wiggle the liner down. Also on the front side of the liner, is a philips screw. Remove it, and then you should be able to bend the fender liner back. This will give you access to the low beam light. Undo the connector, and twist the halogen bulb right out of it's socket.
Take one of the hid bulbs out of it's packaging, and put it into the headlight, and twist it gently so that it locks into place. You should have a few wires dangling out of the back of the light. Look for two spade connectors. These will tap into the OEM connector. If you look at the wires on the OEM connector, red is indeed positive on mine. Use a voltmeter to 2x check the connections. After that, put the other connectors on the red ballast. Note the clip on connector, the retaining tabs in this example face outward (it can fit in the opposite direction, so be careful!)
That's all you need to test it! Now we clean the ballast and mount some double sided tape for mounting. Under the headlight is a plastic tray where the ballast will fit very nicely. We chose to put the ballast there, and put the connectors facing forward. You can also see this area if you look from the top of the truck and look down behind the headlight. Clean this tray area well and let it dry. Use strips of the 3m tape that comes with the kit. Click on some of the pictures to see exactly where I mounted mine.
Cinch everyting up where needed with the included zip ties, and repeat on the passenger side! Here's a few pics of the lights installed first two are with the drivers' HID and passenger halogen. Next two are with all the hid xenons's installed.
So we now have a great kit installed on the Titan. We took about 1 hour and that was going very slow and taking pictures. Just take your time, use a volt meter, and everything should be just fine!
This site is just a collection of experiences with our cars. You mileage may vary, and all info is provided as is. Use of the names Nissan®, Nissan North America, Inc. and others referred to herein are trademarks or registered trade names of their respective companies or mark holders and used for descriptive purposes only. Swankmonkey Racing / DMS Tuning is not associated with or endorsed by Nissan or Nissan North America, Inc.
© 2003 -2004 Swankmonkey Racing / DMS Tuning - email@example.com